In the September 21st issue of the Wall Street Journal, the editors pose the following question: can countries cut carbon emissions without hurting economic growth? In his introductory essay, Michael Totty frames the issues as follows:

“There’s little doubt: Cutting greenhouse gases will be costly. But that leads to two big questions. First, how costly? And second, can nations afford it? As policy makers around the world take action to avoid a predicted climate catastrophe, the debate is turning to the costs of reducing carbon-dioxide emissions. Energy-efficiency measures are often pricey, and alternative energy sources are more expensive than the fossil fuels they replace. A steep price on carbon emissions will ripple through the economy. Does that mean a serious effort to tackle global warming is incompatible with economic growth? Or can we make significant cuts in greenhouse-gas emissions without causing serious damage to the economy?

We put the question to a pair of experts. Robert Stavins, a professor of business and government at Harvard University and director of Harvard’s environmental economics program, says the answer to the second question is yes: Making the necessary cuts need cause little more than a blip in world-wide growth if smart policies are used.

Steven Hayward, a fellow at the American Enterprise Institute for Public Policy Research, says no: Energy use — and the carbon dioxide it emits — is so central to the world’s economy that major cuts can’t be made without significant damage.

Of course, the answers can depend in large part on how “significant cuts” and “serious damage” are defined. Many scientists, the European Parliament and the Waxman-Markey climate legislation approved by the U.S. House of Representatives have set a goal of cutting carbon emissions about 80% by 2050, so that was picked as constituting significant cuts.

As the accompanying essays show, such a definition leaves plenty of room for disagreement.”

I encourage you to read the entire Journal Report on Environment in the Wall Street Journal (there’s an excellent Q&A on carbon offsets by Bob Curran) and to check out my affirmative response, “Yes: The Transition Can be Gradual — and Affordable,” as well as Steven Hayward’s well-articulated negative response, “No: Alternatives are Simply Too Expensive.”

Understandably, the editors wanted to highlight differences between us in order to develop a concise and clear debate. I find it interesting, however, that in an audio interview/debate at the Wall Street Journal web site (Podcast: Crafting a Global Policy), which was by nature more free-wheeling and less limited by space constraints, there is a remarkable amount of agreement between Mr. Hayward and me on a number of key issues.

For now, in today’s post — liberated from space constraints — I want to expand a bit on my WSJ essay, in which I responded, yes, the transition can be gradual and affordable.

Can the nations of the world meaningfully address the threat of global climate change without inflicting unjustifiable damage to their economies? The answer that has emerged with increasing clarity is a resounding “yes.”

Although “The Day After Tomorrow,” the 2004 disaster epic about the greenhouse effect’s apocalyptic consequences, had less scientific basis than “The Wizard of Oz,” scientific reality is disturbing enough. Man-made emissions of greenhouse gases — including carbon dioxide (CO₂) from the combustion of fossil fuels — are very likely to change the earth’s climate in ways that most people will regret. World energy trends are unsustainable — environmentally, economically, and socially.

The global recession has slowed emissions growth, but the world is on a path to more than double global atmospheric greenhouse gas (GHG) concentrations to 1,000 parts per million (ppm) in CO₂-equivalent terms by the end of the century, resulting in an average global temperature increase of 6 degrees Centigrade. But increased temperatures — which might well be welcome in some places — are only part of the story.

The most important consequences of climate change will be changes in precipitation (causing, for example, 75 to 250 million people in Africa to be exposed to increased water stress due to climate change by 2020, with rain-fed agriculture yields falling by as much as 50%), disappearance of glaciers throughout the world (and decreased snowpack in areas ranging from the western United States to Asia), droughts in mid to low latitudes (with severe effects in Australia), decreased productivity of cereal crops (at lower latitudes, especially in tropical regions), increased sea level, loss of islands and 30% of global coastal wetlands, increased flooding (in all parts of the world, but greatest in Asia), greater storm frequency and intensity (both typhoons and hurricanes), risk of massive species extinction (20 to 30% of all species, including massive coral mortality), and significant spread of infectious disease. On the other hand, climate change will also bring some health benefits to temperate areas, such as fewer deaths from cold exposure. But such benefits will be greatly outweighed by negative health effects of rising temperatures (cardo-respiratory, diarrhoeal, and infectious diseases, and increased morbidity and mortality from heat waves, floods, and droughts), especially in developing countries.

These impacts will have severe economic, social, and political consequences for countries worldwide, ranging from malnutrition and mass migration (hundreds of millions of people displaced) to national security threats. Bottom-line, comprehensive estimates of economic impacts of unrestrained climate change vary, with most falling in the range of 2 to 5% of world GDP per year by the middle of the century. The best estimates of marginal damages of emissions (again, by mid-century) are in the range of $100 to $175 per ton of CO₂ (in today’s dollars).

The world is already experiencing the adverse effects of increasing concentrations of GHGs in the atmosphere, with concentrations already about 60% above pre-industrial levels, greatly exceeding the natural range over the past 600,000 years. Just one example: the Greenland ice sheet has been losing mass at a rate of 179 billion tons per year since 2003.

To have a coin toss’s 50-50 chance of keeping temperature increases below 2 degrees Centigrade — the level at which the worst consequences of climate change can be avoided — it will be necessary to stabilize atmospheric concentrations at 450 ppm. (Even this would result in significant sea-level rise, species loss, and increased frequency of extreme weather, according to the U.N. Intergovernmental Panel on Climate Change.) Consistent with the 450 ppm goal is a long-range target of cutting U.S. emissions 80% below 2005 levels by 2050, which happens to be the target of legislation passed earlier this year by the U.S. House of Representatives, H.R. 2454, the so-called Waxman-Markey bill.

Now, to the heart of the WSJ question: will a serious effort to tackle global warming is incompatible with economic growth? My response was and is that the nations of the world do not have to wreck their economies to avert the crisis. If appropriate and intelligent policies are employed, the job can be done at reasonable and acceptable cost.

Critics argue that the Waxman-Markey legislation — to cut U.S. emissions 80% below 2005 levels by 2050 — will mean big, disruptive changes to our infrastructure and untold economic damage. But they make a couple of basic errors. For one thing, they seem to think we’d have to replace the entire infrastructure quickly, paying trillions of dollars to shift to cleaner power. They also seem to assume that we have to choose between much more expensive energy and no energy at all.

The move to greener power doesn’t have to be completed immediately, and it doesn’t have to be painful. The right transition plan will increase consumers’ bills gradually and modestly, and allow companies to make gradual, well-timed moves.

How would this work? One way is via a combination of national and multinational cap-and-trade systems. Companies around the world would be issued rights by their governments to produce carbon, which they could buy and sell on an open market. If they wanted to produce more carbon, they could buy another company’s rights. If they produced less carbon than they needed, they could sell their extra rights. What’s more, companies could earn more rights by creating appropriate “offsets” that mitigated their carbon use, such as planting forests. Nations could add carbon taxes to the mix.

The effect would be to send price signals through the market — making use of less carbon-intensive fuels more cost-competitive, providing incentives for energy efficiency and stimulating climate-friendly technological change, such as methods of capturing and storing carbon, as well as safe nuclear power.

Julian Puckett

Robert Stavins

More Efficient

True, in the short term changing the energy mix will come at some cost, but this will hardly stop economic growth. As economies have grown and matured, they have become more adept at squeezing more economic activity out of each unit of energy they generate and consume. Consider this: From 1990 to 2007, while world emissions rose 38%, world economic growth soared 75% — emissions per unit of economic activity fell by more than 20%.

Critics argue we can’t possibly increase efficiency enough to hit the 80% goal. In a very limited sense, that’s true. Efficiency improvements alone, like the ones that propelled us forward in the past, won’t get us where we need to go by 2050. But this plan doesn’t rely solely on boosting efficiency. It brings together a host of other changes, such as moving toward greener power sources. What’s more, making gradual changes means we don’t have to scrap still-productive power plants, but rather begin to move new investment in the right direction.

As for how much this will cost, the best economic analyses — including studies from the U.S. Congressional Budget Office and the U.S. Energy Information Administration — say such a policy in the U.S. could cost considerably less than 1% of gross domestic product per year in the long term, or up to $175 per household in 2020. (As the Obama administration is fond of saying, that’s about the cost of one postage stamp per household per day.)

In the end, we would be delaying 2050’s expected economic output by no more than a few months. And bear in mind that previous environmental actions, such as attacking smog-forming air pollution and cutting acid rain, have consistently turned out to be much cheaper than predicted.

The best economic experts have validated the wisdom of adopting climate policies: from Yale’s William Nordhaus, who has supported moderate carbon taxes to cut emissions as an “insurance policy” against the most serious consequences of climate change, to MIT’s Richard Schmalensee and Columbia’s Glenn Hubbard, who have endorsed the climate policy recommendations of the bipartisan National Commission on Energy Policy, to Harvard’s Martin Weitzman, who has argued for much more aggressive policies because of the risk of particularly catastrophic outcomes. And a diverse set of CEOs, including the heads of some of the largest U.S. corporations, acting as part of the U.S. Climate Action Partnership, have called on the government “to quickly enact strong national legislation to require significant reductions of greenhouse gas emissions.”

Critics are wary of raising energy prices, arguing that no nations have grown wealthy with expensive power. But historically, it is the scarcity and cost of energy that have prompted technological changes as well as the use of new forms of power. What’s more, critics challenge the price estimates the experts have set out. They say that the predictions depend on extensive — and unrealistic — cooperation among nations. In particular, they say, developing nations won’t sign onto plans for curbing emissions, for fear of losing their economic momentum.

Indeed, we do need a sensible international arrangement in place to achieve low costs, and the economic pain will be much greater if we don’t set up an international carbon market. But it can be done. Many nations have already initiated such emissions-control policies. And the world can be brought together in a meaningful, long-term arrangement that is scientifically sound, economically rational and politically pragmatic.

Road to Cooperation

Because the benefits of any single nation taking action to address global climate change are spread worldwide, unlike the costs, it may never be in the self-interest of a single country to take unilateral action. This is the nature of a global commons problem. For this reason, international cooperation is required; this is the point of climate negotiations among some 190 countries, which will continue in Copenhagen this December. It is also the motivation for the U.S. administration’s Major Economies Forum, which brings together the 17 largest economies, accounting for 80% of GHG emissions.

Europe has already put significant climate policy in place, and Australia, New Zealand, and Japan are moving to have their policies in place within a year. But without evidence of serious action by the U.S., there will be no meaningful future international agreement, and certainly not one that includes the key, rapidly-growing developing countries — Brazil, China, India, Indonesia, Mexico, South Africa, and South Korea. U.S. policy developments can and should move in parallel with international negotiations.

Understandably, developing countries have a very different perspective than the currently industrialized world regarding climate policy. After all, the vast majority of the accumulated stock of man-made greenhouse gases in the atmosphere is due to economic activity in the richer countries over the past century and more. But the share of global emissions attributable to developing countries is significant and growing rapidly. China surpassed the United States as the world’s largest CO2 emitter in 2006. And developing countries are likely to account for more than half of global emissions by the year 2020, if not before. China, Korea, and others are beginning to take action.

Most important, all of the key countries of the world can be brought together in a meaningful and pragmatic arrangement. Such a post-Kyoto international agreement can expand the scope of action to include key developing countries, but with targets linked via an appropriate formula with economic growth, so that emissions can be reduced around the world, while emissions (and job) leakage from the industrialized to the developing world is avoided, and economic growth continues in all parts of the world.

Reducing Costs

The longer we put off serious action, the more aggressive our future efforts will need to be, as greenhouse gases and carbon-spewing capital assets continue to accumulate. Plants built today will determine emissions for a generation. In the steel sector — where plant lifetimes typically exceed 25 years — more than half of all plants in the world are now less than 10 years old. The picture is similar in the cement industry, as well as more broadly throughout the economy. For every year of delay before moving to a sustainable emissions path, the global cost of taking necessary actions increases by hundreds of billions of dollars.

Critics argue that we can afford to wait because the world of tomorrow will be wealthier and better able to absorb the costs. But acting sooner, such as by adopting the emission caps proposed in the U.S. House legislation, will lower the ultimate costs of achieving the target, because there will be more time allowed for gradual transition — which is what keeps costs down. Perhaps most important, the costs of failing to take action — the damages of climate change — would be substantially greater.

Getting serious about climate change won’t be free, and it won’t be easy. But if state-of-the-science predictions about the consequences of continued delay are correct, the time has come for sensible and meaningful action.

THE climate change summit at the United Nations on Tuesday, September 22nd,  is aimed to build momentum for the 15th Conference of the Parties to the UN Framework Convention on Climate Change in Copenhagen in December, where nations will continue negotiations on a successor to the 1997 Kyoto Protocol, which expires in 2012.   Later this week, the G20 finance ministers will meet in Pittsburgh, Pennsylvania, where international climate policy will be high on the agenda.

In the midst of this, Professor Sheila Olmstead of Yale University and I wrote an opinion piece which appeared as an op-ed in The Boston Globe on Sunday, September 20th.  (See the original here, with the artwork; and/or for a detailed description of our proposal, see our discussion paper for the Harvard Project on International Climate Agreements.)

In the op-ed, we argued that to be successful, any feasible successor agreement must contain three essential elements: meaningful involvement by a broad set of key industrialized and developing nations; an emphasis on an extended time path of emissions targets; and inclusion of policy approaches that work through the market, rather than against it.

Consider the need for broad participation. Industrialized countries have emitted most of the stock of man-made carbon dioxide in our atmosphere, so shouldn’t they reduce emissions before developing countries are asked to contribute? While this seems to make sense, here are four reasons why the new climate agreement must engage all major emitting countries – both industrialized and developing.

First, emissions from developing countries are significant and growing rapidly. China surpassed the United States as the world’s largest CO2 emitter in 2006, and developing countries may account for more than half of global emissions within the next decade. Second, developing countries provide the best opportunities for low-cost emissions reduction; their participation could dramatically reduce total costs. Third, the United States and several other industrialized countries may not commit to significant emissions reductions without developing country participation. Fourth, if developing countries are excluded, up to one-third of carbon emissions reductions by participating countries may migrate to non-participating economies through international trade, reducing environmental gains and pushing developing nations onto more carbon-intensive growth paths (so-called “carbon leakage’’).

How can developing countries participate in an international effort to reduce emissions without incurring costs that derail their economic development? Their emissions targets could start at business-as-usual levels, becoming more stringent over time as countries become wealthier. If such “growth targets’’ were combined with an international emission trading program, developing countries could fully participate without incurring prohibitive costs (or even any costs in the short term).  (For a very insightful analysis of such growth targets, please see Harvard Professor Jeffrey Frankel’s discussion paper for the Harvard Project on International Climate Agreements.)

The second pillar of a successful post-2012 climate policy is an emphasis on the long run. Greenhouse gases remain in the atmosphere for decades to centuries, and major technological change is needed to bring down the costs of reducing CO2 emissions. The economically efficient solution will involve firm but moderate short-term targets to avoid rendering large parts of the capital stock prematurely obsolete, and flexible but more stringent long-term targets.

Third, a post-2012 global climate policy must work through the market rather than against it. To keep costs down in the short term and bring them down even lower in the long term through technological change, market-based policy instruments must be embraced as the chief means of reducing emissions. One market-based approach, known as cap-and-trade, is emerging as the preferred approach for reducing carbon emissions among industrialized countries.

Under cap-and-trade, sources with low control costs may take on added reductions, allowing them to sell excess permits to sources with high control costs. The European Union’s Emission Trading Scheme, established under the Kyoto Protocol, is the world’s largest cap-and-trade system. In June, the US federal government took a significant step toward establishing a national cap-and-trade policy to reduce CO2 emissions, with the passage in the House of Representatives of the American Clean Energy and Security Act (about which I have written in many previous posts at this blog). Other industrialized countries are instituting or planning national CO2 cap-and-trade systems, including Australia, Canada, Japan, and New Zealand.

Linking such cap-and-trade systems under a new international climate treaty would bring cost savings from increasing the market’s scope, greater liquidity, reduced price volatility, lessened market power, and reduced carbon leakage. Cap-and-trade systems can be linked directly, which requires harmonization, or indirectly by linking with a common emissions-reduction credit system; indeed, this is what appears to be emerging even before a new agreement is forged. Kyoto’s Clean Development Mechanism allows parties in wealthy countries to purchase emissions-reduction credits in developing countries by investing in emissions-reduction projects. These credits can be used to meet emissions commitments within the EU-ETS, and other systems are likely to accept them as well.

Countries meeting in New York and Pittsburgh this week, and in Copenhagen in December, should consider these three essential elements as they negotiate a new climate agreement. A new international climate agreement missing any of these three pillars may be too costly, and provide too little benefit, to represent a meaningful attempt to address the threat of global climate change.

Global climate change is a serious environmental threat, and sound public policies are needed to address it effectively and sensibly.

There is now significant interest and activity within both the U.S. Administration and the U.S. Congress to develop a meaningful national climate policy in this country.  (If you’re interested, please see some of my previous posts:  “Opportunity for a Defining Moment” (February 6, 2009); “The Wonderful Politics of Cap-and-Trade:  A Closer Look at Waxman-Markey” (May 27, 2009); “Worried About International Competitiveness?  Another Look at the Waxman-Markey Cap-and-Trade Proposal” (June 18, 2009); “National Climate Change Policy:  A Quick Look Back at Waxman-Markey and the Road Ahead” (June 29, 2009).  For a more detailed account, see my Hamilton Project paper, A U.S. Cap-and-Trade System to Address Global Climate Change.)

And as we move toward the international negotiations to take place in December of this year in Copenhagen, it is important to keep in mind the global commons nature of the problem, and hence the necessity of designing and implementing an international policy architecture that is scientifically sound, economically rational, and politically pragmatic.

Back in the U.S., with domestic action delayed in the Senate, several states and regions in the United States have moved ahead with their own policies and plans.  Key among these is California’s Global Warming Solutions Act of 2006, intended to return the state’s greenhouse gas (GHG) emissions in 2020 to their 1990 level.  In 2006, three studies were released indicating that California can meet its 2020 target at no net economic cost.  That is not a typographical error.  The studies found not simply that the costs will be low, but that the costs will be zero, or even negative!  That is, the studies found that California’s ambitious target can be achieved through measures whose direct costs would be outweighed by offsetting savings they create, making them economically beneficial even without considering the emission reductions they may achieve.  Not just a free lunch, but a lunch we are paid to eat!

Given the substantial emission reductions that will be required to meet California’s 2020 target, these findings are ­- to put it mildly – surprising, and they differ dramatically from the vast majority of economic analyses of the cost of reducing GHG emissions.  As a result, I was asked by the Electric Power Research Institute – along with my colleagues, Judson Jaffe and Todd Schatzki of Analysis Group – to evaluate the three California studies.

In a report titled, “Too Good To Be True?  An Examination of Three Economic Assessments of California Climate Change Policy,” we found that although some limited opportunities may exist for no-cost emission reductions, the studies substantially underestimated the cost of meeting California’s 2020 target — by omitting important components of the costs of emission reduction efforts, and by overestimating offsetting savings some of those efforts yield through improved energy efficiency.  In some cases, the studies focused on the costs of particular actions to reduce emissions, but failed to consider the effectiveness and costs of policies that would be necessary to bring about those actions.  Just a few of the flaws we identified lead to underestimation of annual costs on the order of billions of dollars.  Sadly, the studies therefore did not and do not offer reliable estimates of the cost of meeting California’s 2020 target.

This episode is a reminder of a period when similar studies were performed by the U.S. Department of Energy at the time of the Kyoto Protocol negotiations.  Like the California studies, the DOE (Interlaboratory Work Group) studies in the late 1990s suggested that substantial emission reductions could be achieved at no cost.  Those studies were terribly flawed, which was what led to their faulty conclusions.  I had thought that such arguments about massive “free lunches” in the energy efficiency and climate domain had long since been laid to rest.  The debates in California (and some of the rhetoric in Washington) prove otherwise.

While the Global Warming Solutions Act of 2006 sets an emissions target, critical policy design decisions remain to be made that will fundamentally affect the cost of the policy.  For example, policymakers must determine the emission sources that will be regulated to meet those targets, and the policy instruments that will be employed.  The California studies do not directly address the cost implications of these and other policy design decisions, and their overly optimistic findings may leave policymakers with an inadequate appreciation of the stakes associated with the decisions that lie ahead.

On the positive side, a careful evaluation of the California studies highlights some important policy design lessons that apply regardless of the extent to which no-cost emission reduction opportunities really exist.  Policies should be designed to account for uncertainty regarding emission reduction costs, much of which will not be resolved before policies must be enacted.  Also, consideration of the market failures that lead to excessive GHG emissions makes clear that to reduce emissions cost-effectively, policymakers should employ a market-based policy (such as cap-and-trade) as the core policy instrument.

The fact that the three California studies so egregiously underestimated the costs of achieving the goals of the Global Warming Solutions Act should not be taken as indicating that the Act itself is necessarily without merit.  As I have discussed in previous posts, that judgment must rest – from an economic perspective – on an honest and rigorous comparison of the Act’s real benefits and real costs.

Climate concerns have gone mainstream, even in the United States.  This has been reflected in the passage by the U.S. House of Representatives of HR 2454, the so-called Waxman-Markey bill, and will soon be reflected in the debates in the U.S. Senate.  (I have written a number of blog posts on this topic.  If you’re interested, please see:  “Opportunity for a Defining Moment” (February 6, 2009); “The Wonderful Politics of Cap-and-Trade:  A Closer Look at Waxman-Markey” (May 27, 2009); “Worried About International Competitiveness?  Another Look at the Waxman-Markey Cap-and-Trade Proposal” (June 18, 2009); “National Climate Change Policy:  A Quick Look Back at Waxman-Markey and the Road Ahead” (June 29, 2009).  For a more detailed account, see my Hamilton Project paper, A U.S. Cap-and-Trade System to Address Global Climate Change.)

At the center of much political attention in the United States is “the future of coal,” a subject that was illuminated by the 2007 MIT study with that title, authored by John Deutch and Ernest Moniz, as well as several reports issued by the U.S. Energy Information Administration (EIA).

CO₂ emissions from coal consumption accounted for 30 percent of U.S. greenhouse gas emissions in 2005, and nearly all resulted from coal’s use in generating electricity.  According to EIA forecasts, the vast majority of coal demand over the coming decades will be from existing power plants, with currently existing plants still accounting for two-thirds of total demand in 2030.  Therefore, while much attention has been given to how climate policy and technological advances may affect new power plants, over the next two decades a policy that affects both existing and new coal-fired power plants would have far greater impacts than a policy that affects only new plants.

Potential climate policies can be grouped into four major categories:  standards, subsidies or credit-based programs, carbon taxes, and cap-and-trade (like Waxman-Markey).  The cost of retrofitting existing plants to meet CO₂ emission standards would likely be so high that standards could be imposed only on new plants.  While such standards may dampen investments in new coal-fired power plants – as they may require expensive carbon-capture-and-storage at any new coal plant (see below) – standards would be unlikely to affect operations of existing plants.  In fact, by increasing the cost of new plants, such standards can encourage generators to extend the life of existing plants.  Hence, new source standards hold little promise in this domain.

Likewise, while subsidies or credit-based programs – including renewable portfolio standards — may displace some new coal-fired generation with other types of generation, they will have little, if any, effect on the operation of existing coal-fired power plants.  And carbon taxes are opposed by the regulated community because of the additional costs they would place on private industry, and are opposed by environmentalists because of the political challenges.

This leaves cap-and-trade.  Such a system would cover both new and existing emission sources, and could have a more pervasive effect on coal use than standards, subsidies, or credit-based programs.  For this and other reasons, most policy attention in the United States has been focused on potential cap-and-trade systems.

Coal combustion generates the most CO₂ emissions per unit of energy.  As a result, a cap-and-trade system’s effect on the cost of coal use would be significantly greater than its effect on the cost of gasoline or natural gas consumption.  For example, a $100 per ton of CO₂ allowance price would increase the average cost of electricity generation from coal-fired power plants by about 400%, the average cost of electricity generation from natural gas plants by about 100%, and gasoline prices by about $1.00 per gallon.

The competitiveness of conventional coal-fired electricity generation relative to other technologies diminishes as the stringency of an emissions cap increases.  Therefore, much attention is being given to opportunities to employ carbon-capture-and-storage (or CCS) technologies, which would separate carbon dioxide from other stack gases, liquify it, and store it underground for long periods of time.

Three important caveats about CCS should be considered.  First, it is likely that CCS will be economically practical only for new plants, and only when CO₂ allowance prices exceed $100 per ton of CO₂ for early adopters (cost estimates have increased over the past few years, as technological and institutional challenges have become clearer).  Second, there is significant uncertainty about the cost of CCS, because it has not yet been commercially demonstrated.  And third, CCS significantly reduces, but does not eliminate, CO₂ emissions from coal-fired generation.

In light of the growing momentum toward a mandatory U.S. climate policy, the anticipated impacts of such policies on coal use are an important issue.  But the remaining uncertainties are great.  Impacts of a climate policy on coal use will depend upon the type of climate policy employed, the stringency of the policy, the future price of natural gas, the future cost and penetration of nuclear and renewable technologies, and the cost of coal-fired generation with carbon capture and storage technologies.  Are all promising topics for future posts.

For more than two decades, environmental law and regulation was dominated by command-and-control approaches — typically either mandated pollution control technologies or inflexible discharge standards on a smokestack-by-smokestack basis.  But in the 1980s, policy makers increasingly explored market-based environmental policy instruments, mechanisms that provide economic incentives for firms and individuals to carry out cost-effective pollution control.  Cap-and-trade systems, in which emission permits or allowances can be traded among potential polluters, continue today to be at the center of this action.

Most recently, this has been in the context of deliberations regarding possible U.S. actions to reduced carbon dioxide and other greenhouse gas emissions linked with global climate change, as in HR 2454, the Waxman-Markey bill approved by the U.S. House of Representatives, as well as in proposals developing in the Senate.  (I have written a number of blog posts on this topic.  If you’re interested, please see:  “Opportunity for a Defining Moment” (February 6, 2009); “The Wonderful Politics of Cap-and-Trade:  A Closer Look at Waxman-Markey” (May 27, 2009); “Worried About International Competitiveness?  Another Look at the Waxman-Markey Cap-and-Trade Proposal” (June 18, 2009); “National Climate Change Policy:  A Quick Look Back at Waxman-Markey and the Road Ahead” (June 29, 2009).  For a more detailed account, see my Hamilton Project paper, A U.S. Cap-and-Trade System to Address Global Climate Change.)

But the transition from command-and-control regulation to market-based policy instruments has not always been easy.  Sometimes policy can outrun basic understanding, and the claims made for the cost-effectiveness of cap-and-trade systems can exceed what can be reasonably anticipated.  Among the factors that can adversely affect the performance of such systems are transaction costs.

In general, transaction costs — those costs that arise from the exchange, not the production, of goods and services — are ubiquitous in market economies.  They can arise from any exchange:  after all, parties to transactions must find one another, communicate, and exchange information.  It may be necessary to inspect and sometimes even measure goods to be transferred, draw up contracts, consult with lawyers or other experts, and transfer title.

In cap-and-trade markets, there are three potential sources of transaction costs. The first source, searching and information-collection, arises because it can take time for a potential buyer of a discharge permit to find a seller, though — for a fee — brokers can facilitate the process.  Although less obvious, a second source of transaction costs — bargaining and deciding — is potentially as important.  A firm entering into negotiations incurs real resource costs, including time and/or fees for brokerage, legal, and insurance services.  Likewise, the third source — monitoring and enforcing — can be significant, although these costs are typically borne by the responsible governmental authority and not by trading partners.

The cost savings that may be realized through cap-and-trade systems depend upon active trading.  But transaction costs are an impediment to trading, and such impediments thereby can limit savings.  So, transaction costs reduce the overall economic benefits of allowance trading, partly by absorbing resources directly and partly by suppressing exchanges that otherwise would have been mutually (indeed socially) beneficial.  But when transaction costs can be kept to a minimum, high levels of trading — and significant cost savings – are the result.

Since David Montgomery’s path-breaking work in 1972, economists have asserted that the post-trading allocation of control responsibility among sources and hence the aggregate costs of control are independent from the initial permit allocation.  This is an extremely important political property, but does this still hold in the presence of transaction costs?  This is a question I investigated in an article titled, “Transaction Costs and Tradable Permits,” which was published in the Journal of Environmental Economics and Management in 1995 (and which the publisher lists as one of the ten most cited articles in the journal’s history, going back to 1974).

The answer to this question is: “it depends.”  If incremental transaction costs are independent of the size of individual transactions, the initial allocation of permits has no effect on the post-trading allocation of control responsibility and aggregate control costs.  But if incremental transaction costs decrease with the size of individual trades, then the initial allocation will affect the post-trading outcome.

This is of great political importance, because it means that in the presence of transaction costs, the initial distribution of permits can matter not only in terms of distributional equity, but in terms of cost-effectiveness or efficiency.  This can reduce the discretion of the Congress (or other legislature or agency) to distribute allowances as they please (in order to generate a constituency of support for the program), and may thereby reduce the political attractiveness and feasibility of a cap-and-trade system.

Empirical evidence, however, indicates that transaction costs have been minimal, indeed trivial, in enacted and implemented cap-and-trade systems, including the U.S. EPA’s leaded-gasoline phasedown in the 1980s, and the well-known SO₂ allowance trading system, enacted as part of the Clean Air Act amendments of 1990.

That’s good news, surely.  But nevertheless, going forward, choices between conventional, command-and-control environmental policies and market-based instruments should reflect the imperfect world in which these instruments are applied.  Such choices are not simple, because no policy panacea exists.

On the one hand, even if transaction costs prevent significant levels of trade from occurring, aggregate costs of control will most likely be less than those of a conventional command-and-control approach.  A trading system with no trading taking place will likely be less costly than a technology standard (because the trading system provides flexibility to firms regarding their chosen means of control) and no more costly than a uniform performance standard.

But the existence of transaction costs may make the choice between conventional approaches and cap-and-trade more difficult because of the ambiguities that are introduced.  With transaction costs — as with other departures from frictionless markets — greater attention is required to the details of designing specific systems.  This is the way to lessen the risk of over-selling such policy ideas and ultimately creating systems that stand the best chance of being implemented successfully.

Whether the policy domain is global climate change or local hazardous waste, it’s exceptionally important to understand the interaction between public policies and technological change in order to assess the effects of laws and regulations on environmental performance.  Several years ago, my colleagues ­- Professor Lori Bennear of Duke University and Professor Nolan Miller of the University of Illinois – examined with me the effects of regulation on technological change in chlorine manufacturing by focusing on the diffusion of membrane-cell technology, widely viewed as environmentally superior to both mercury-cell and diaphragm-cell technologies.  Our results were both interesting and surprising, and merit thinking about in the context of current policy discussions and debates in Washington.

The chlorine manufacturing industry had experienced a substantial shift over time toward the membrane technology. Two different processes drove this shift:  adoption of cleaner technologies at existing plants (that is, adoption), and the closing of facilities using diaphragm and mercury cells (in other words, exit).  In our study, we considered the effects of both direct regulation of chlorine manufacturing and regulation of downstream uses of chlorine.    (By the way, you can read a more detailed version of this story in our article in the American Economic Review Papers and Proceedings, volume 93, 2003, pp. 431-435.)

In 1972, a widely publicized incident of mercury poisoning in Minamata Bay, Japan, led the Japanese government to prohibit the use of mercury cells for chlorine production. The United States did not follow suit, but it did impose more stringent constraints on mercury-cell units during the early 1970’s. Subsequently, chlorine manufacturing became subject to increased regulation under the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and the Comprehensive Environmental Response, Compensation, and Liability Act.  In addition, chlorine manufacturing became subject to public-disclosure requirements under the Toxics Release Inventory.

In addition to regulation of the chlorine manufacturing process, there was also increased environmental pressure on industries that used chlorine as an input. This indirect regulation was potentially important for choices of chlorine manufacturing technology because a large share of chlorine was and is manufactured for onsite use in the production of other products. Changes in regulations in downstream industries can have substantial impacts on the demand for chlorine and thereby affect the rate of entry and exit of chlorine production plants.

Two major indirect regulations altered the demand for chlorine. One was the Montreal Protocol, which regulated the production of ozone-depleting chemicals, such as chlorofluorocarbons (CFCs), for which chlorine is a key ingredient. The other important indirect regulation was the “Cluster Rule,” which tightened restrictions on the release of chlorinated compounds from pulp and paper mills to both water and air. This led to increased interest by the industry in non-chlorine bleaching agents, which in turn affected the economic viability of some chlorine plants.

In our econometric (statistical) analysis, we analyzed the effects of economic and regulatory factors on adoption and exit decisions by chlorine manufacturing plants from 1976 to 2001.  For our analysis of adoption, we employed data on 51 facilities, eight of which had adopted the membrane technology during the period we investigated.

We found that the effects of the regulations on the likelihood of adopting membrane technology were not statistically significant.  Mercury plants, which were subject to stringent regulation for water, air, and hazardous-waste removal, were no more likely to switch to the membrane technology than diaphragm plants. Similarly, TRI reporting appeared to have had no significant effect on adoption decisions.

We also examined what caused plants to exit the industry, with data on 55 facilities, 21 of which ceased operations between 1976 and 2001. Some interesting and quite striking patterns emerged. Regulations clearly explained some of the exit behavior.  In particular, indirect regulations of the end-uses of chlorine accelerated shutdowns in some industries. Facilities affected by the pulp and paper cluster rule and the Montreal Protocol were substantially more likely to shut down than were other facilities.

It is good to remember that the diffusion of new technology is the result of a combination of adoption at existing facilities and entry and exit of facilities with various technologies in place. In the case of chlorine manufacturing, our results indicated that regulatory factors did not have a significant effect on the decision to adopt the greener technology at existing plants. On the other hand, indirect regulation of the end-uses of chlorine accelerated facility closures significantly, and thereby increased the share of plants using the cleaner, membrane technology for chlorine production.

Environmental regulation did affect technological change, but not in the way many people assume it does. It did so not by encouraging the adoption of some technology by existing facilities, but by reducing the demand for a product and hence encouraging the shutdown of facilities using environmentally inferior options.  This is a legitimate way for policies to operate, although it’s one most politicians would probably prefer not to recognize.

With the development of climate legislation proceeding in the U.S. Senate, a key question is whether the United States can cost-effectively reduce a significant share of its contributions to increased atmospheric CO₂ concentrations through forest-based carbon sequestration.  Should biological carbon sequestration be part of the domestic portfolio of compliance activities?

The potential costs of carbon sequestration policies should be one major criterion, and so it can be helpful to assess the cost of supplying forest-based carbon sequestration.  This is a topic which I’ve investigated in a series of papers with various co-authors over the past ten years (“Land-Use Change and Carbon Sinks: Econometric Estimation of the Carbon Sequestration Supply Function.” Journal of Environmental Economics and Management 51(2006): 135-152, with Ruben Lubowski and Andrew Plantinga; “Climate Change and Forest Sinks: Factors Affecting the Costs of Carbon Sequestration.” Journal of Environmental Economics and Management 40(2000):211-235, with Richard Newell; and “The Costs of Carbon Sequestration: A Revealed-Preference Approach.” American Economic Review, volume 89, number 4, September 1999, pp. 994-1009.)   Most useful for policy purposes is probably the 2005 report Kenneth Richards and I wrote for the Pew Center on Global Climate Change (“The Cost of U.S. Forest-Based Carbon Sequestration”).  In that report, we surveyed and synthesized the best cost estimates from all available sources.

Human activities — particularly the extraction and burning of fossil fuels and the depletion of forests — are causing the level of CO₂ in the atmosphere to rise.  It may be possible to increase the rate at which ecosystems remove CO₂ from the atmosphere and store the carbon in plant material, decomposing detritus, and organic soil.  In essence, forests and other highly productive ecosystems can become biological scrubbers by removing (sequestering) CO₂ from the atmosphere.  Much of the current interest in carbon sequestration has been prompted by suggestions that sufficient lands are available to use sequestration for mitigating significant shares of annual CO₂ emissions, and related claims that this approach provides a relatively inexpensive means of addressing climate change.  In other words, the fact that policy makers are giving serious attention to carbon sequestration can partly be explained by (implicit) assertions about its marginal cost, or (in economists’ parlance) its supply function, relative to other mitigation options.

Among the key factors that affect estimates of the cost of forest carbon sequestration are: (1) the tree species involved, forestry practices utilized, and related rates of carbon uptake over time; (2) the opportunity cost of the land-that is, the value of the affected land for alternative uses; (3) the disposition of biomass through burning, harvesting, and forest product sinks; (4) anticipated changes in forest and agricultural product prices; (5) the analytical methods used to account for carbon flows over time; (6) the discount rate employed in the analysis; and (7) the policy instruments used to achieve a given carbon sequestration target.

Given the diverse set of factors that affect the cost and quantity of potential forest carbon sequestration in the United States, it should not be surprising that cost studies have produced a broad range of estimates.  Ken Richards and I identified eleven previous analyses that were good candidates for comparison and synthesis, and we made their results mutually consistent by adjusting them for constant-year dollars, use of equivalent annual costs as outcome measures, identical discount rates, and identical geographic scope.  We also employed econometric methods to estimate the central tendency (or “best-fit”) of the normalized marginal cost functions from the eleven studies as a rough guide for policy makers of the projected availability of carbon sequestration at various costs.

Three major conclusions emerged from our survey and synthesis.  First, there is a broad range of possible forest-based carbon sequestration opportunities available at various magnitudes and associated costs.  The range depends upon underlying biological and economic assumptions, as well as analytical cost-estimation methods employed.

Second, a systematic comparison of sequestration supply estimates from national studies produces a range of $25 to $75 per ton for a program size of 300 million tons of annual carbon sequestration. The range increases somewhat- to $30-$90 per ton of carbon-for programs sequestering 500 million tons annually.

Third, when a transparent and accessible econometric technique was employed to estimate the central tendency (or “best-fit”) of costs estimated in the studies, the resulting supply function for forest-based carbon sequestration in the United States is approximately linear up to 500 million tons of carbon per year, at which point marginal costs reach approximately $70 per ton.

A 500 million ton per year sequestration program would be very significant, offsetting approximately one-third of annual U.S. carbon emissions.  At this level, the estimated costs of carbon sequestration are comparable to typical estimates of the costs of emissions abatement through fuel switching and energy efficiency improvements.  This result indicates that sequestration opportunities ought to be included in the economic modeling of climate policies.  And it further suggest that if it is possible to design and implement a domestic carbon sequestration program, then such a program ought to be included in a cost-effective portfolio of compliance strategies when the United States enacts a mandatory domestic greenhouse gas reduction program.  Large-scale forest-based carbon sequestration can be a cost-effective tool that should be considered seriously by policy makers.

Of course, this raises the question of whether a policy that will bring about such biological carbon sequestration cost-effectively can be developed, whether as part of a cap-and-trade system, a related offset scheme, or through some other policy mechanism.  That is a question without easy answers (as I’ve noted in a previous post on the Waxman-Markey legislation), but the cost analyses I’ve reviewed in this post suggest that it is important to explore possible ways of incorporating biological carbon sequestration in future U.S. climate policy.

With the locus of action on Federal climate policy moving this week from the House of Representatives to the Senate, this is a convenient moment to step back from the political fray and reflect on some fundamental questions about U.S. environmental policy.

One such question is whether economic analysis – in particular, the comparison of the benefits and costs of proposed policies – plays a truly useful role in Washington, or is it little more than a distraction of attention from more important perspectives on public policy, or – worst of all – is it counter-productive, even antithetical, to the development, assessment, and implementation of sound policy in the environmental, resource, and energy realms.   With an exceptionally talented group of thinkers – including scientists, lawyers, and economists – now in key environmental and energy policy positions at the White House, the Environmental Protection Agency, the Department of Energy, and the Department of the Treasury, this question about the usefulness of benefit-cost analysis is of particular importance.

For many years, there have been calls from some quarters for greater reliance on the use of economic analysis in the development and evaluation of environmental regulations.  As I have noted in previous posts on this blog, most economists would argue that economic efficiency — measured as the difference between benefits and costs — ought to be one of the key criteria for evaluating proposed regulations.  (See:  “The Myths of Market Prices and Efficiency,” March 3, 2009; “What Baseball Can Teach Policymakers,” April 20, 2009; “Does Economic Analysis Shortchange the Future?” April 27, 2009)  Because society has limited resources to spend on regulation, such analysis can help illuminate the trade-offs involved in making different kinds of social investments.  In this sense, it would seem irresponsible not to conduct such analyses, since they can inform decisions about how scarce resources can be put to the greatest social good.

In principle, benefit-cost analysis can also help answer questions of how much regulation is enough.  From an efficiency standpoint, the answer to this question is simple — regulate until the incremental benefits from regulation are just offset by the incremental costs.  In practice, however, the problem is much more difficult, in large part because of inherent problems in measuring marginal benefits and costs.  In addition, concerns about fairness and process may be very important economic and non-economic factors.  Regulatory policies inevitably involve winners and losers, even when aggregate benefits exceed aggregate costs.

Over the years, policy makers have sent mixed signals regarding the use of benefit-cost analysis in policy evaluation.  Congress has passed several statutes to protect health, safety, and the environment that effectively preclude the consideration of benefits and costs in the development of certain regulations, even though other statutes actually require the use of benefit-cost analysis.  At the same time, Presidents Carter, Reagan, Bush, Clinton, and Bush all put in place formal processes for reviewing economic implications of major environmental, health, and safety regulations. Apparently the Executive Branch, charged with designing and implementing regulations, has seen a greater need than the Congress to develop a yardstick against which regulatory proposals can be assessed.  Benefit-cost analysis has been the yardstick of choice

It was in this context that ten years ago a group of economists from across the political spectrum jointly authored an article in Science magazine, asking whether there is role for benefit-cost analysis in environmental, health, and safety regulation.  That diverse group consisted of Kenneth Arrow, Maureen Cropper, George Eads, Robert Hahn, Lester Lave, Roger Noll, Paul Portney, Milton Russell, Richard Schmalensee, Kerry Smith, and myself.  That article and its findings are particularly timely, with President Obama considering putting in place a new Executive Order on Regulatory Review.

In the article, we suggested that benefit-cost analysis has a potentially important role to play in helping inform regulatory decision making, though it should not be the sole basis for such decision making.  We offered eight principles.

First, benefit-cost analysis can be useful for comparing the favorable and unfavorable effects of policies, because it can help decision makers better understand the implications of decisions by identifying and, where appropriate, quantifying the favorable and unfavorable consequences of a proposed policy change.  But, in some cases, there is too much uncertainty to use benefit-cost analysis to conclude that the benefits of a decision will exceed or fall short of its costs.

Second, decision makers should not be precluded from considering the economic costs and benefits of different policies in the development of regulations.  Removing statutory prohibitions on the balancing of benefits and costs can help promote more efficient and effective regulation.

Third, benefit-cost analysis should be required for all major regulatory decisions. The scale of a benefit-cost analysis should depend on both the stakes involved and the likelihood that the resulting information will affect the ultimate decision.

Fourth, although agencies should be required to conduct benefit-cost analyses for major decisions, and to explain why they have selected actions for which reliable evidence indicates that expected benefits are significantly less than expected costs, those agencies should not be bound by strict benefit-cost tests.  Factors other than aggregate economic benefits and costs may be important.

Fifth, benefits and costs of proposed policies should be quantified wherever possible.  But not all impacts can be quantified, let alone monetized.  Therefore, care should be taken to assure that quantitative factors do not dominate important qualitative factors in decision making.  If an agency wishes to introduce a “margin of safety” into a decision, it should do so explicitly.

Sixth, the more external review that regulatory analyses receive, the better they are likely to be.  Retrospective assessments should be carried out periodically.

Seventh, a consistent set of economic assumptions should be used in calculating benefits and costs.  Key variables include the social discount rate, the value of reducing risks of premature death and accidents, and the values associated with other improvements in health.

Eighth, while benefit-cost analysis focuses primarily on the overall relationship between benefits and costs, a good analysis will also identify important distributional consequences for important subgroups of the population.

From these eight principles, we concluded that benefit-cost analysis can play an important role in legislative and regulatory policy debates on protecting and improving the natural environment, health, and safety.  Although formal benefit-cost analysis should not be viewed as either necessary or sufficient for designing sensible public policy, it can provide an exceptionally useful framework for consistently organizing disparate information, and in this way, it can greatly improve the process and hence the outcome of policy analysis.

If properly done, benefit-cost analysis can be of great help to agencies participating in the development of environmental regulations, and it can likewise be useful in evaluating agency decision making and in shaping new laws (which brings us full-circle to the climate legislation that will be developed in the U.S. Senate over the weeks and months ahead, and which I hope to discuss in future posts).

Like any legislation, the Waxman‑Markey bill has its share of flaws, but its cap-and-trade system has medium and long‑term targets for reducing greenhouse gas emissions that are sensible, and the cap‑and‑trade system is — for the most part — well designed.  With some exceptions, the bill’s cap‑and‑trade system will achieve meaningful reductions of carbon dioxide and other greenhouse gas emissions at minimal cost to the economy.

There has been much lamenting about the corporate give-away in the bill, but this is unfounded, as I explained in detail in my May 27^th post on The Wonderful Politics of Cap-and-Trade: A Closer Look at Waxman-Markey. Concerns have also been expressed — such as by a number of Republican members of Congress during last Friday’s floor debate in the House of Representatives — about negative impacts on the international competitiveness of U.S. firms.  The only real solution to the international competitiveness issue in the long term is to bring non‑participating countries within an international climate regime in meaningful ways. (On this, please see the work of the Harvard Project on International Climate Agreements.)  But that solution is fundamentally outside of the scope of the domestic policy action of any individual nation, including the United States.

In the meantime, the Waxman‑Markey approach of combining output‑based updating allocations in the short term for select sectors with the option in the long term of a Presidential determination (under stringent conditions) for import allowance requirements for specific countries and sectors was sensible and pragmatic (see my June 18^th post on Worried About International Competitiveness? Another Look at the Waxman-Markey Cap-and-Trade Proposal).

That’s the good news.  But the bad news is that last-minute changes in the bill changed what was a Presidential option regarding long-term back-up border adjustments (tariffs) to a requirement that the President put such tariffs in place under specified conditions.  This moved the legislation considerably closer to risky protectionism, as President Obama rightly noted in comments to the press on Sunday.

Also, the compromise amendments with the House agriculture committee that provide for generous numbers of potential offsets from the agricultural sector (regulated not by EPA, but by USDA!) are troubling — not in terms of driving up compliance costs, but in terms of reducing the real environmental performance of the system.  This is because of the general problem of limited additionality of claimed reductions under offset (or emission-reduction-credit) systems, as opposed to cap-and-trade systems, plus the well-known difficulties of measuring non-point emissions, let alone emissions reductions, from agriculture.

These and other design issues will be important topics when the Senate takes up its own climate legislation, although the debate in that body on some of these issues will likely be quite different.  For example, there is likely to be more interest in the Senate in the use of a “price collar,” a mechanism to constrain both the maximum and the minimum market price of allowances over time.  This would be a move beyond the safety-valve mechanism that is provided in the House legislation.

When the action moves to the Senate, the greatest attention and the greatest skepticism should be directed not to the cap‑and‑trade mechanism, which is — for the most part — well designed in Waxman‑Markey, but rather to other elements of the legislation, some of which are highly problematic. While the titles of Waxman‑Markey that create the cap‑and‑trade system are ‑‑ on balance ‑‑ sensible, and will result in meaningful emissions reductions cost effectively, the other titles of the bill include a host of conventional standards and subsidies, many of which (under the cap‑and‑trade umbrella) will have minimal or no environmental benefits, but will limit flexibility and thereby have the unintended consequence of driving up compliance costs. That’s the soft under‑belly of this legislation that needs to be selectively, surgically repaired.

It is the fault of economists — myself included — that we have given so much attention to the cap-and-trade system that we have ignored these other important elements of the legislation, elements that unfortunately can degrade significantly the cost-effectiveness of the package while providing little if any incremental benefits to the environment.  Even the Congressional Budget Office, in its excellent economic analysis of HR 2454, focused exclusively on the bill’s cap-and-trade program.  Going forward, CBO, EPA, and independent analysts need to examine the bill’s other elements, and assess what those elements provide at what incremental cost.

A broader question — also raised by House Republicans in the floor debate — is whether the United States should be moving towards the enactment of a domestic climate policy before a sensible, post‑Kyoto international agreement has been negotiated and ratified. Such an international agreement should include not only the countries of the industrialized world, but also the key, rapidly‑growing economies of the developing world ‑‑ China, India, Brazil, Korea, Mexico, South Africa, and Indonesia ‑‑ which are and will increasingly be major contributors to emissions.

It’s natural for such a question to be raised about the very notion of the U.S. adopting a policy to help address what is fundamentally a global problem.  The environmental benefits of any single nation’s reductions in greenhouse gas emissions are spread worldwide, unlike the costs. This means that for any single country, the costs of action will inevitably exceed its direct benefits, despite the fact that the global costs of action will be less than global benefits.  This is the nature of a global commons problem, and this is the very reason why international cooperation is required.

The U.S. is now engaged in international negotiations, and the credibility of the U.S. as a participant, let alone as a leader, in shaping the international regime is dependent upon our demonstrated willingness to take actions at home.

Europe has put its climate policy in place, and Australia, New Zealand, and Japan are moving to have their policies in place within a year. If the United States is to play a leadership role in international negotiations for a sensible post‑Kyoto international climate regime, the country must begin to move towards an effective domestic policy ‑ with legislation that is timed and structured to coordinate with the emerging post‑Kyoto climate regime.

Without evidence of serious action by the U.S., there will be no meaningful international agreement, and certainly not one that includes the key, rapidly‑growing developing countries. U.S. policy developments can and should move in parallel with international negotiations.

So, the Waxman‑Markey bill has its share of flaws, but it represents a reasonable starting point for Senate deliberation on what can become a national climate policy that will place the United States where it ought to be -‑ in a position of international leadership to help develop a global climate agreement that is scientifically sound, economically rational, and politically acceptable to the key nations of the world.

The potential impacts of proposed U.S. climate policies on the competitiveness of U.S. industries is a major political issue, and it was one of the key issues in the Energy and Commerce Committee of the House of Representatives in the design of Henry Waxman and Edward Markey’s H.R. 2454 (the American Clean Energy and Security Act of 2009). In the floor debate that will soon take place as the full House considers the bill, it will be an important issue. It promises to be an equally important topic when the Senate takes up its own climate legislation, although the debate in that body on this issue will likely be quite different.

The ultimate answer to the question of how best to address concerns about international competitiveness is to bring all countries – both the industrialized nations and the developing world’s large, rapidly-growing economies (China, India, Brazil, Korea, Mexico, South Africa, and Indonesia) – into a meaningful (post-Kyoto) international climate change agreement (a topic on which I’ve spent much time over the past several years).  But – for the most part — that long-term objective is outside of the reach of the domestic policy of any single nation, even the United States.

Can Domestic Climate Policy Address Competitiveness Concerns?

A range of approaches has been considered for implementing sound, domestic climate policy while seeking to “level the economic playing field” with other countries. While no approach is without its flaws (as I describe below), the approach taken in the Waxman-Markey legislation is sensible and pragmatic:  in the short term, output-based updating allocations of allowances are employed for a few energy-intensive, trade-sensitive sectors; and in the long term, the President is given the option to put in place (under specific, stringent conditions) import-allowance-requirements in selected cases.

In order to explain my reasoning for coming to this conclusion, let’s back up for a moment and reflect on the reasons for the high level of political attention and receptiveness in the United States toward employing a cap-and-trade system nationally to address emissions of greenhouse gases.

It is because of the significant economic and political advantages of cap-and-trade systems to address carbon dioxide and other greenhouse gas emissions that most (but not all) attention by policy makers has been focused on this policy approach. First, it provides a cost-effective means of achieving meaningful reductions in emissions over relevant time horizons. Second, it offers an easy means of compensating for the inevitably unequal burdens imposed by virtually any climate policy. Third, it is less likely than alternative approaches (such as a carbon tax) to be degraded – in terms of environmental performance and cost-effectiveness – by political forces. Fourth, it has a history of successful adoption and implementation over two decades. And fifth, it provides a straightforward means to link and harmonize with other countries’ climate policies.

The Waxman-Markey bill, H.R. 2454, would establish such a U.S. cap-and-trade system to reduce emissions that contribute to global climate change. The bill would put a declining cap on emissions and create a corresponding number of emission permits. Regulated firms could trade these permits at a price determined by the market – creating powerful incentives to reduce emissions cost-effectively.

But imposing a price (cost) on carbon in the United States at a time when some other countries (in the developing world) are not taking comparable actions raises concerns about negative impacts on the competitiveness of U.S. industry, particularly in energy-intensive, trade-sensitive sectors. This heightens worries about possible job losses, a particularly troubling concern when the United States find itself in the worst global recession in a generation.

The environmental side of the same coin is “carbon leakage.” Again, imposing a cost on the production of carbon-intensive goods and services shifts comparative advantage in the production of those same goods and services in the direction of countries not taking on such costs.  Also, reduced demand in the United States for carbon-intensive fuels such as coal can be expected to reduce worldwide demand enough that the world price of coal would fall, thereby making it more attractive for use in countries that are not participating in a meaningful international climate agreement (or otherwise taking significant domestic climate actions).

Both routes can result in a shift of carbon-intensive production to countries without climate controls, and therefore an increase in their CO2 emissions. This is carbon leakage, which reduces the environmental benefits of mitigating emissions and reduces cost-effectiveness of any actions (properly measured in terms of net changes in CO2 atmospheric concentrations).  Given that the United States, the European Union, and Japan are net importers of embodied CO2, while China and India are net exporters, the environmental – as well as the economic – impacts of carbon leakage are a natural concern of lawmakers.

Despite the high levels of attention that international competitiveness therefore receives in debates about domestic climate policies, economic research has consistently found that the actual competitiveness impacts of proposed domestic climate policies would not — in quantitative terms — constitute a major economy-wide economic issue for the United States, partly because differences in other costs of production (including labor and energy costs, without accounting for carbon constraints) across countries swamp differences in costs due to environmental policies, including prospective climate policies.

On the other hand, this is a real issue for some specific sectors, in particular, energy-intensive industries subject to international competition, such as aluminum, cement, fossil fuels, glass, iron and steel, and paper. More importantly, it is in any event a major (economy-wide) political issue.  So, it needs to be addressed in any domestic climate policy which is to be both meaningful and politically pragmatic.

How About Free Allowance Allocations?

The approach frequently proposed by policy makers and the approach utilized in the European Union for its Emission Trading Scheme, and discussed in a number of other countries for their planned cap-and-trade programs is generous and free allocation of allowances to specific sectors and companies.  This makes the receiving companies happy, but has no effect on their international competitiveness. This is because such a free grant of allowances is no different than cash, that is, a fixed subsidy. The allowances can be sold by the receiving companies, are as good as cash, and represent a lump-sum transfer from the government, not tied to carbon abatement efforts or production (and hence, in the language of economics, are infra-marginal subsidies rather than marginal incentives).

Since the subsidy has no effect on the company’s marginal cost of production (its supply function), it has no effect on international competitiveness. The company will continue to find it as challenging as it did without the subsidy to produce cement, steel, or whatever at a price that can compete with companies located in countries without climate policies (apart from liquidity effects, which are minor in most cases). And the domestic company will have the same incentives as previously to locate its next production facility in a country without a climate policy.

A Potentially Effective Approach:  Output-Based Updating Allocations

With proper design, allowance allocations can be used effectively to address leakage and competitiveness.  If the free allocation of allowances is tied to the company’s production level, then it does affect marginal production costs, and therefore does affect competitiveness. Such a “home rebate” can thereby reduce leakage. This is, in fact, the approach taken in the Waxman-Markey legislation, and it is a potentially effective means to address concerns about international competitiveness for a select set of energy-intensive trade-sensitive sectors.

There are, however, some legitimate concerns about this approach of linking annual allowance allocations with production levels, as I wrote in my previous post, “The Wonderful Politics of Cap-and-Trade: A Closer Look at Waxman-Markey.” Such output-based updating allocations can provide perverse incentives and thereby drive up the costs of achieving a cap. This is because an output-based updating allocation is essentially a production subsidy. This distorts firms’ pricing and production decisions in ways that can increase the cost of meeting an emissions target.

Think of it this way. On the one hand, the cap-and-trade system is (sensibly) increasing the cost of using carbon-intensive fuels and emitting CO2 into the atmosphere. An aluminum producer, for example, is therefore paying more for the (fossil-fuel generated) electricity it uses, driving up its cost of production. At the same time, the government hands a subsidy to the company for each unit of aluminum it produces, working at cross-purposes with the energy-pricing incentive, and thereby driving up the aggregate social costs of achieving the cap. In addition, these home rebates do not distinguish between competition from countries with and without domestic climate policies.

The Key Question

So, there are problems with output-based updating allocations, but the key question in the real world of legislative design is whether better approaches are available?  The answer – in my view – is that there are several other available approaches, but they are not any better; and indeed, they appear to be significantly worse.

An Alternative Approach:  Import Allowance Requirements

One alternative approach is an import allowance requirement, whereby imports of highly carbon-intensive goods (in terms of their manufacture) must hold allowances for the U.S. cap-and-trade system, mirroring requirements on U.S. sources, if those imports come from countries which have not taken comparable climate policy actions. Note that this approach – which is referred to as a border adjustment, and is an implicit border tax – differentiates according to the country of origin.  In principle, this approach can maintain a level playing-field between imports and domestic production, reduce leakage, and possibly help induce key developing countries to take domestic action to avoid the implicit border tax on their products.

The import allowance requirement approach has its own problems, however. First, it focuses exclusively on imports into the United States, and has no effect on the competitiveness of U.S. exports. Second, it may not be compliant with World Trade Organization (WTO) rules, because it would discriminate among trading nations (I’ll leave that issue for trade economists and trade lawyers to analyze and debate).

Third, it is questionable whether it would be effective as an inducement for developing countries to join an international agreement to reduce emissions. Why is that? Think about China, for example. China is the largest producer of cement in the world, accounting for almost 50% of world output. It is also the world’s largest exporter of cement. This may sound as though the threat of import allowance requirements in the U.S. and European cap-and-trade systems would be a powerful incentive for China to undertake emission reductions at home in order to avoid the border tax on its cement exports.  But China consumes 97% of its cement domestically, exporting only 3%, and much of that to developing countries. So, would a country such as China be willing to increase the costs of producing 97% of its output in order to protect a market for 1% or 2% of its production?(To be fair, for small developing countries for which their exports of a given product are a large share of their total output, the message could potentially be quite different.)

Despite these three problems with the import-allowance-requirement approach, note that it was a key part of the Lieberman-Warner Climate Security Act in the U.S. Senate in 2008, and may re-appear when serious debate commences in the Senate on climate legislation later this year. Also, it should be noted that this approach of import-allowance-requirements is included as a long-term backstop in Waxman-Markey if the President determines by 2022 that the output-based allocation mechanism is insufficient for some of the energy-intensive trade-sensitive sectors (and if a number of stringent conditions are met; see the “International Reserve Allowance Program” in the bill).

Other Possible Approaches

Another potential approach is a border rebate for exports to level the playing field abroad, whereby the government rebates the value of emissions embodied in exports. Imports, however, would retain their competitive advantage at home, and there are problems with WTO compliance. Finally, there is full boarder adjustment, meaning a border (import) tax plus a border (export) subsidy. Here there are questions not only about consistency with international trade law, but also concerns about feasibility. In some cases, there are tremendous challenges of calculating the embodied emissions of foreign products, and more generally, there are difficulties of defining and enforcing reliable rules of origin.

The Good, the Bad, and the Ugly

Thus, none of these approaches are ideal, not home rebates as in Waxman-Markey, nor implicit border taxes on exports as in Lieberman-Warner, nor border rebates, nor full border adjustments.  As I said at the outset, the only real solution to the international competitiveness issue in the long term is to bring non-participating countries within an international climate regime in meaningful ways. (On this, please see the work of the Harvard Project on International Climate Agreements.) But that solution is fundamentally outside of the scope of the domestic policy action of any individual nation, including the United States.

So, among the feasible set of options to address international competitiveness concerns – if only imperfectly and at some cost – which is best? The two live political options appear to be the output-based updating allocation mechanism in the Waxman-Markey legislation and the import allowance requirement, typically associated with the former Lieberman-Warner bill. At this time, meaning in the short term, I would be more worried about the potential damage to the international trade regime that import allowance requirements could foster than about the incremental social costs that an output-based updating allocation mechanism will create.

This is a political problem without a perfect solution (other than bringing all key countries into a meaningful international climate agreement).  For now, the domestic political process has done a credible job of patching together a set of interim solutions. Among the range of possible approaches of trying to level the international economic playing field, none is without its flaws, but the approach taken in the Waxman-Markey legislation appears best.  Subject to possible improvements on the House floor or in the Senate, the Waxman-Markey approach of combining output-based updating allocations in the short term for select sectors with the option in the long term of a Presidential determination (under stringent conditions) for import allowance requirements for specific countries and sectors seems both sensible and pragmatic.

A Broader Question:  Should the U.S. Enact a Domestic Climate Policy without a New, Sound International Climate Agreement in Place?

Stepping back from the specific policy design question, the broader argument has been made (indeed until a few years ago I was among those making it) that there should be no serious movement on a U.S. domestic climate policy until a meaningful and sensible (post-Kyoto) international agreement has been negotiated and ratified.  It is natural for questions to be raised about the very notion of the U.S. adopting a policy to help address a global problem. The environmental benefits of any single nation’s reductions in greenhouse gas emissions are spread worldwide, unlike the costs. This creates the possibility that some countries will want to “free ride” on the efforts of others. It’s for this very reason that international cooperation is required.

That is the why the U.S. is now vigorously engaged in international negotiations, and the credibility of the U.S. as a participant, let alone as a leader, in shaping the international regime is dependent upon our demonstrated willingness to take actions at home. Europe has already put its climate policy in place, and Australia, New Zealand, and Japan are moving to have their policies in place within a year. If the United States is to play a leadership role in international negotiations for a sensible post-Kyoto international climate regime, the country must begin to move towards an effective domestic policy – with legislation that is timed and structured to coordinate with the emerging post-Kyoto climate regime.

Without evidence of serious action by the U.S., there will be no meaningful international agreement, and certainly not one that includes the key, rapidly-growing developing countries.  U.S. policy developments can and should move in parallel with international negotiations.

The Bottom Line

So, like any legislation, the Waxman-Markey bill has its share of flaws. But it represents a solid foundation for a domestic climate policy that can help place the United States where it ought to be – in a position of international leadership to develop a global climate agreement that is scientifically sound, economically rational, and politically acceptable to the key nations of the world.